Benchtop 16-1×2 Optical Switch equipment Rack Mounted 16 pairs of
1x2 Fiberoptic Switches
GEZHI's Benchtop 16-1×2 Optical Switch equipment Rack Mounted 16
pairs of 1x2 Fiberoptic Switches is a kind of light path control
device. plays a control light path and convert the light path. The
16-1X2-U benchtop Optical Switch equipment consists of 16 pairs of
1x2 synchronous switch light path combinations of mechanical
optical switch, optical switch light path control switch can be 16
button on the panel control, also can through the short-range RS -
232 serial port communication mode or remote RJ45 Ethernet
communication by sending a program-controlled command control
switch light path, equipment state of light path by the green light
and red light shows light path.
Features
Low insertion loss, Fast switching
SerialNet, High Reliability, High Stability
Transparent transmission signal. High stability and reliability.
LED display panel. Visual display, Convenient operation.
RS232 Control and Ethernet Remote Management
Applications
FITL
Automatic Measurement
Cable Monitoring and Maintaining system
Optical Network Remote Monitoring
Specification
| Parameters | Unit | Indicators |
| Channel No. | | 16-1X2-U |
| Wavelength Range | nm | 1260~1650nm |
| Insertion Loss | dB | Typ. ≤0.8dB,Max.≤1.5 dB |
| Repeatability | dB | ≤ ±0.02 |
| Return Loss | dB | ≥ 50 |
| Crosstalk | dB | ≥ 55 |
| WDL | dB | ≤ 0.25 |
| PDL | dB | ≤ 0.05 |
| Optical Power | mW | ≤ 500 |
| Switching Time | ms | ≤10 ms(adjacent channel) |
| Fiber Type | um | SM,9/125 |
| Connector | | FC/APC |
| Monitoring Port | | RJ45 & RS-232 |
| Working Power Supply | V | AC:100～ 240 (50/60Hz) |
| Power Consumption | W | ＜ 10 |
| Operating Temperature | ℃ | -10 ～ 60 |
| Size | mm | 2U:483 x 250 x 89 |
Panel to Explain:
Front PanelPOWER: Equipment power switch
RS232: Serial communication interface
RJ45: Ethernet communication interface
A~P: Optical switch control buttons and display lights
COM: Public End of Optical Path
1-Blue: Optical output 1(LED Display Lights out)
2-Red: Optical output 2(LED Display Light on)
Back Panel
AC:85~265V:AC power supply interface
Default Setting
●RS-232:Baud rate:9600; Data bits:8 bit; Stop bit: 1 bit; Parity
bit:NONE;
●RJ45: IP:192.168.1.100 ; PORT:5000; TCP/IP:TCP Server and UDP
(Fixed port:18888)
